Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
3dprint:solidoodle [2019/02/09 11:26] – [Motors] philpem | 3dprint:solidoodle [2020/08/21 13:15] (current) – [Current setup] philpem | ||
---|---|---|---|
Line 23: | Line 23: | ||
* Keenovo 120W silicone bed heater element with internal thermistor | * Keenovo 120W silicone bed heater element with internal thermistor | ||
* [[https:// | * [[https:// | ||
- | * [[http:// | + | * [[http:// |
+ | * Massively reduces Y-axis binding (especially after the bushings have started to wear) | ||
* [[https:// | * [[https:// | ||
- | * http://tomhorsley.com/hardware/ | + | * [[https://www.thingiverse.com/thing: |
- | * Massively reduces Y-axis binding (especially after the bushings have started to wear) | + | |
* Next additions: | * Next additions: | ||
* [[https:// | * [[https:// | ||
Line 38: | Line 38: | ||
Per [[http:// | Per [[http:// | ||
- | ^ Axis ^ Motor ^ | + | ^ Axis ^ Motor ^ |
| X | [[https:// | | X | [[https:// | ||
- | | Y | [[http:// | + | | Y | [[http:// |
- | | Z | ::: | + | | Z | ::: |
- | | Extruder | + | | Extruder |
I replaced the stock Y-axis motor with one from WeDo3DPrinting when I fitted the direct-drive mod. I did the same with the X-axis motor when I replaced the carriage. This means the current motor setup is: | I replaced the stock Y-axis motor with one from WeDo3DPrinting when I fitted the direct-drive mod. I did the same with the X-axis motor when I replaced the carriage. This means the current motor setup is: | ||
Line 56: | Line 56: | ||
* X: new motor 150mN.m vs. original 134mN.m | * X: new motor 150mN.m vs. original 134mN.m | ||
* Y: new motor 480mN.m vs. original 212mn.m | * Y: new motor 480mN.m vs. original 212mn.m | ||
+ | |||
+ | New motors awaiting installation: | ||
+ | |||
+ | * Z-axis: Precision Maker MTR-N17-48, NEMA-17. 1.8-degree (200 step). 3.4V 1.7A, 520 mN.m | ||
===== Board configuration ===== | ===== Board configuration ===== |