This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision |
3dprint:solidoodle [2019/02/09 11:28] – philpem | 3dprint:solidoodle [2020/08/21 13:15] (current) – [Current setup] philpem |
---|
* Keenovo 120W silicone bed heater element with internal thermistor | * Keenovo 120W silicone bed heater element with internal thermistor |
* [[https://www.thingiverse.com/thing:104817|Cable chain]] and [[https://www.thingiverse.com/thing:118182|belt guard]] | * [[https://www.thingiverse.com/thing:104817|Cable chain]] and [[https://www.thingiverse.com/thing:118182|belt guard]] |
* [[http://tomhorsley.com/hardware/solidoodle/solidoodle-ydirect.html|Y-axis direct-drive mod]] (3D model on [[http://www.thingiverse.com/thing:593006|Thingiverse]]) | * [[http://tomhorsley.com/hardware/solidoodle/solidoodle-ybearing.html|Y-axis bearing support with SFL686ZZ flanged bearing]] and [[http://tomhorsley.com/hardware/solidoodle/solidoodle-ydirect.html|Y-axis direct-drive mod]] (3D model on [[http://www.thingiverse.com/thing:593006|Thingiverse]]) |
| * Massively reduces Y-axis binding (especially after the bushings have started to wear) |
* [[https://www.thingiverse.com/thing:85707|Lawsy extended filament guide]] | * [[https://www.thingiverse.com/thing:85707|Lawsy extended filament guide]] |
* http://tomhorsley.com/hardware/solidoodle/solidoodle-ybearing.html -- Y-axis bearing support with SFL686ZZ flanged bearing | * [[https://www.thingiverse.com/thing:34284|Rear spool holder]] by Tarwin |
* Massively reduces Y-axis binding (especially after the bushings have started to wear) | |
* Next additions: | * Next additions: |
* [[https://www.thingiverse.com/thing:1443926|Belt clamps]] to reduce the risk of the Y-belt breaking at the screw-holes | * [[https://www.thingiverse.com/thing:1443926|Belt clamps]] to reduce the risk of the Y-belt breaking at the screw-holes |