The ACM has a 6502-style bus interface, with the following pins:
D0-D7 | 8-bit data bus |
|---|---|
RS | Register select, address bit zero |
R/!W | Read/not-write |
!ACMSEL | ACM Select, negative-going |
!SIRQ | ACM IRQ (to set-top processor) |
There is also an EXT ACM DATA pin, which connects to the ACM phono port on the back of the receiver.
The ACM also receives composite sync from the STB, and produces RGB video and fast-blanking for the on-screen display output.
!ACMSEL transactions are 400ns wide.| RS | Read | Write |
|---|---|---|
0 | ||
1 | Status? |
| Bit | Function |
|---|---|
| 7 | |
| 6 | |
| 5 | |
| 4 | |
| 3 | |
| 2 | |
| 1 | |
| 0 |
When monitoring traffic using the Saleae, the high byte of the parallel analyser is used as follows:
00/0: RS=0 Write 01/1: RS=1 Write 10/2: RS=0 Read 11/3: RS=1 Read
Reads return 0x00 as no ACM is present.
| R/W | RS | Data | Function |
|---|---|---|---|
| read | 1 | - | |
| write | 1 | 05 | |
| read | 0 | - | |
| read | 1 | - | |
| write | 0 | 0C | |
| read | 1 | - | |
| write | 1 | 3D | |
| read | 0 | - | |
| read | 1 | - | |
| read | 1 | - |
RS=1 reads repeat forever in bursts of 79 to 82 attempts, with a 42.8 to 57.6us gap between each burst. There is a delay of 5.2us between each attempt.