hamradio:mmdvm:setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
hamradio:mmdvm:setup [2019/10/19 21:39]
philpem
hamradio:mmdvm:setup [2019/10/19 21:39] (current)
philpem
Line 17: Line 17:
 sudo systemctl disable hciuart</​code>​ sudo systemctl disable hciuart</​code>​
     * This disables the serial console and Bluetooth     * This disables the serial console and Bluetooth
-  * Shut down the Pi and install the MMDVM POG board. **Note:** remove the 3.3V regulator if you're using the POG board on Pi!+  * Shut down the Pi and install the MMDVM POG board. **Note:** remove the 3.3V regulator if you're using the POG board as HAT!
   * Boot the Pi and install the MMDVM software.   * Boot the Pi and install the MMDVM software.
  
  • Last modified: 2019/10/19 21:39
  • by philpem