Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
photo:mamiya16 [2018/05/13 16:41]
philpem [Reloading Mamiya-16 cartridges]
photo:mamiya16 [2018/08/07 00:37] (current)
philpem [Reloading Mamiya-16 cartridges] light seals
Line 33: Line 33:
   - You will need all the parts of the cartridge: the take-up spool, cartridge body and the two caps.   - You will need all the parts of the cartridge: the take-up spool, cartridge body and the two caps.
   - Remove any residual tape or glue from the cartridge components.   - Remove any residual tape or glue from the cartridge components.
 +  - Replace the light seals (each is a 35mm long by 5mm wide piece of sticky-back Velour)
   - In complete darkness, or a camera changing bag:   - In complete darkness, or a camera changing bag:
     - Cut a length of 16mm-wide film, 16-18 inches long.     - Cut a length of 16mm-wide film, 16-18 inches long.
  • Last modified: 2018/08/07 00:37
  • by philpem